| Frames-BIKERS CHOICEฎ RIGID FRAME-LBCTR-49-8695-8697 |
| $999.95 |
|
|
|
BIKERS CHOICEฎ
RIGID FRAME
Built by Kraft/Tech for Bikers Choiceฎ
Stock width tire
1-1/4 tubing
Uses 4 or 5 speed tranny
Softail style brakes
Mounts for spring solo seat included on frame |
|
| Frames-KRAFT/TECH 180/200 RIGID FRAME 1-1/4 TUBING-LBCTR-49-6755-6500 |
| $917.95 |
|
|
|
KRAFT/TECH 180/200 RIGID FRAME 1-1/4 TUBING
Frames are engineered for 180 tire with 1-1/2 belt or 200 tire
with chain
Offset built into frame, no spacing required
Stock motor and transmission bolt-in
Accepts 4 or 5-speed transmissions
Requires using removable transmission plate
Component kit included
Frames with tank mounts accept Softail-style flatside tanks
Made in USA
KRAFT/TECH FRAMES
All frames are TIG-MIG welded and they will accept Evolution engines with cylinders
up to .200 taller than stock Evolution
Frames designed for 5 or 6-speed Softail-type transmissions
These frames have been an industry-standard since their introduction
Component kits are included with purchase of frame
|
|
| Frames-KRAFT/TECH 180/200 SOFTAIL-STYLE FRAME 1-1/4 TUBING-LBCTR-49-6497 |
| $1,476.00 |
|
|
|
KRAFT/TECH 180/200 SOFTAIL-STYLE FRAME 1-1/4 TUBING
34ฐ rake, 2 downtube stretch with rear section
Designed for 180 width tire with 1-1/2 belt or
200 width tire with chain
Offset built into frame, no spacing is required
Stock motor and transmission bolt-in, this
frame uses removable transmission plate
Component kit included
Fender struts sold separately
Accepts Softail-style flatside tanks
Made in USA
KRAFT/TECH FRAMES
All frames are TIG-MIG welded and they will accept Evolution engines with cylinders
up to .200 taller than stock Evolution
Frames designed for 5 or 6-speed Softail-type transmissions
These frames have been an industry-standard since their introduction
Component kits are included with purchase of frame
|
|
| Frames-KRAFT/TECH 230/240/250 SINGLE DOWNTUBE RIGID 1-3/8 MEGA-TUBE WITH HIDDEN AXLE-LBCTR-49-6504 |
| $1,840.00 |
|
|
|
KRAFT/TECH 230/240/250 SINGLE DOWNTUBE RIGID 1-3/8 MEGA-TUBE WITH HIDDEN AXLE
Frames for 230/240/250 tires, 2 downtube 1-3/4
backbone, 1-3/8 thereafter, all DOM steel tubing, mandrel bent
6-1/2 back bone stretch
Engineered with a super-strong upper frame design and
integral neck webbing that offers unparalleled strength with
pleasing aesthetics
Frames are complete with billet hidden axle rear section with
stainless steel cover set
Single downtube merges with lower frame rails in such a way
as to continue the frames smooth lines, often overlooked on
other frames
Frames are set-up with offset already built-in (requires only simple
spacing of engine sprocket or pulley, 230/240/250 frames use
1 spacing between engine and inner primary cover
Integral 1-piece transmission mounting plate is part of the frame
structure, assuring unit construction strength and the best
possible alignment
Will accept Kraft/Tech oil tanks and 1-piece round top fenders
Axles are 1 in diameter
Frames accept any 5 or 6-speed Softail-style transmission
together with 1-1/2 belt on 230/240 wide tires or 1-1/8
belt or chain on 250 wide tires
Made in USA |
|
| Frames-KRAFT/TECH RIGID FRAME 1-1/4 TUBING, STOCK WIDTH-LBCTR-49-6754-6499 |
| $799.95 |
|
|
|
KRAFT/TECH
RIGID FRAME
1-1/4 TUBING, STOCK WIDTH
Frames come with 30ฐ or 34ฐ neck rake angles, with front leg
stretches of 0 or 2
Frames are designed for removable transmission plate for
chain drive 4 and 5-speeds
Uses stock width disc brake wheel, Softail-style brakes
(pre-2000), axle and adjusters
Accepts Softail-style flatside tanks
Made in USA
KRAFT/TECH FRAMES
All frames are TIG-MIG welded and they will accept Evolution engines with cylinders
up to .200 taller than stock Evolution
Frames designed for 5 or 6-speed Softail-type transmissions
These frames have been an industry-standard since their introduction
Component kits are included with purchase of frame
|
|
| Frames-KRAFT/TECH SOFTAIL-STYLE FRAME 1-1/8 TUBING, STOCK WIDTH-LBCTR-49-6495 |
| $866.95 |
|
|
|
KRAFT/TECH FRAMES
All frames are TIG-MIG welded and they will accept Evolution engines with cylinders
up to .200 taller than stock Evolution
Frames designed for 5 or 6-speed Softail-type transmissions
These frames have been an industry-standard since their introduction
Component kits are included with purchase of frame
KRAFT/TECH
SOFTAIL-STYLE FRAME
1-1/8 TUBING, STOCK WIDTH
30ฐ rake, 0 stretch
Frames are designed for removable
transmission plate
Engineered for use with 87-99 rear section assemblies (rear
section not included)
Comes equipped with stock coil and oil tank mounts and
accepts Softail style flatside gas tanks
Made in USA
KRAFT/TECH
SWINGARMS FOR 87-99 SOFTAIL
MODELS WITH STOCK WIDTH
Replaces H-D#47537-89A Softail rear section
Accepts all stock components
49-6496 H-D#47537-89A |
|
| Frames-KRAFT/TECH SPORTSTER RIGID FRAMES-LBCTR-49-6780-49-6784 |
| $876.95 |
|
|
|
KRAFT/TECH SPORTSTER RIGID FRAMES
1-1/4 tubing
30ฐ and 34ฐ neck rakes
Available in stock width tire or 180 tire
No tank mounts
Accepts 86-03 Sportster driveline
Made in USA
KRAFT/TECH FRAMES
All frames are TIG-MIG welded and they will accept Evolution engines with cylinders
up to .200 taller than stock Evolution
Frames designed for 5 or 6-speed Softail-type transmissions
These frames have been an industry-standard since their introduction
Component kits are included with purchase of frame
|
|
| Frames-KRAFT/TECH TC-B 180/200 SOFTAIL-STYLE FRAME 1-1/4 TUBING-LBCTR-49-6760-6763 |
| $1,749.95 |
|
|
|
KRAFT/TECH
TC-B 180/200 SOFTAIL-STYLE FRAME
1-1/4 TUBING
Frames accept 00-Up Twin Cam 88 B motor and
transmission
Designed for 180 width tire with 1-1/2 belt or 200 width
tire with chain
Fender struts sold separately
Component kit included
Accepts most other stock components
Made in USA
KRAFT/TECH FRAMES
All frames are TIG-MIG welded and they will accept Evolution engines with cylinders
up to .200 taller than stock Evolution
Frames designed for 5 or 6-speed Softail-type transmissions
These frames have been an industry-standard since their introduction
Component kits are included with purchase of frame
|
|
| Frames-KRAFT/TECH TC-B SOFTAIL-STYLE FRAME 1-1/4 TUBING, STOCK WIDTH-LBCTR- |
| $1,294.95 |
|
|
|
|
KRAFT/TECH FRAMES
All frames are TIG-MIG welded and they will accept Evolution engines with cylinders
up to .200 taller than stock Evolution
Frames designed for 5 or 6-speed Softail-type transmissions
These frames have been an industry-standard since their introduction
Component kits are included with purchase of frame
KRAFT/TECH
TC-B SOFTAIL-STYLE FRAME
1-1/4 TUBING, STOCK WIDTH
30ฐ rake, 0 stretch
Replacement style frames designed for stock
components
Frames use 00-Up Twin Cam 88 B motor and
transmission
Sold without rear sections, stock rear section
assembly must be used
Made in USA |
|
| Frames-PAUGHCO SPORTSTER RIGID FRAME-LBCTR-59-9246-9010 |
| $866.95 |
|
|
|
PAUGHCO
SPORTSTER RIGID FRAME
Features O.E.M. style neck, no stretch and 35ฐ rake
Stamped serial number and manufacturers statement of origin
included
Made in USA
Note: Frames require Big Twin triple tree with 1 neck.
Oil Tank Fits Paughco Rigid Frame for Sportster $150.95
Battery Boxes-Electric Start
Uses FXE style battery
Includes top, bottom and strap
Fits Paughco Rigid Frame for Sportster $57.95 59-9014
Chain Guard Fits Paughco Rigid Frame for Sportster 59-9016 $39.95 |
|
| Frames-PAUGHCO STOCK STYLE RIGID FRAME-LBCTR-59-9250 |
| $946.95 |
|
|
|
PAUGHCO
STOCK STYLE RIGID FRAME
Wishbone frame is the closest we offer to an early stock
rigid frame
Features include no stretch, no rake, an O.E.M. style neck
Fat Bob tank mounts
Seat post hole
Includes manufacturers statement of origin
Made in USA |
|
| Frames-PAUGHCO SWINGARM FRAME FOR ROAD KINGS-LBCTR-59-9253 |
| $2,101.95 |
|
|
|
PAUGHCO SWINGARM FRAME FOR ROAD KINGS
Stock style 94-06 frame with 26ฐ rake
Accepts Twin Cam 88 and Evolution engines with matching
Touring model transmissions
Accepts all stock sheet metal, forks and suspension
Made in USA |
|
| Frames-PAUGHCO WIDE TIRE RIGID FRAMES FOR SPORTSTERS-LBCTR-59-9251-9252 |
| $1,205.95 |
|
|
|
PAUGHCO
WIDE TIRE RIGID FRAMES
FOR SPORTSTERS
All frames have the chopper neck and use 1 neck bearings
Accepts up to a 180 series tire with a belt and up to a 200
series with a chain
For 86-03 engines
No tank mounts
Made in USA |
|
| Frames-SWINGARMS-KRAFT/TECH SWINGARMS FOR 87-99 SOFTAIL MODELS WITH STOCK WIDTH-LBCTR-49-6496 |
| $275.50 |
|
|
|
KRAFT/TECH FRAMES
All frames are TIG-MIG welded and they will accept Evolution engines with cylinders
up to .200 taller than stock Evolution
Frames designed for 5 or 6-speed Softail-type transmissions
These frames have been an industry-standard since their introduction
Component kits are included with purchase of frame
KRAFT/TECH
SWINGARMS FOR 87-99 SOFTAIL
MODELS WITH STOCK WIDTH
Replaces H-D#47537-89A Softail rear section
Accepts all stock components
49-6496 H-D#47537-89A
|
|
