|
|
| Gas Tank-"2" STRETCH GAS TANK 4.2 GALLON" |
| $379.99 |
|
|
|
Gas tank accepts a left side petcock with a fuel capacity of 4.0 gallons. Tank accepts right and left side bung cap set.
2" stretch is to the back of the tank for a more cleaner and custom look. The stretch does not affect the mounts. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. it is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit, clear, condition and seal to help stop leaks and prevent corrosion. Check petcock opening, making sure the petcock can be easily installed. Petcock should be masked or plugged during painting for easy installation of petcock.
Fits:
FXDWG 1991-1995 Stock dash
Measurements
TOP LENGTH: 16" BOTTOM LENGTH: 20" REAR WIDTH: 9"
FRONT WIDTH: 14.5" REAR HEIGHT: 2" FRONT HEIGHT: 8.5"
FRONT TUNNEL HEIGHT: 7" REAR TUNNEL HEIGHT: 1.5" TUNNEL LENGTH: 17" |
|
| Gas Tanks-"BOBBED GAS TANK 5.1 GALLONS, ONE PIECE" |
| $299.95 |
|
|
|
Gas tank is dual cap style, and features a left and right side screw bung. Fuel capacity is 5.1 gallons.
Tank uses stock style FXDWG dash console. Requires sanding and primer before painting. Petcock should be masked or plugged during painting for easy installation of petcock. Tank is not for fuel injected models. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean, condition and seal to help stop leaks and prevent corrosion.
Fits:
FXDWG 1996-2003
Measurements
Top Length: 18-1/2" Bottom Length: 18" Rear Width: 8"
Front Width: 15" Rear Height: 2" Front Height: 8-1/2"
Front Tunnel Height: 6" Rear Tunnel Height: 1-1/2" Tunnel Length: 18-3/4"
|
|
| Gas Tanks-"BOBBED GAS TANK, 4.2 GAL, ONE PIECE" |
| $299.99 |
|
|
|
Gas tank with dual gas caps accepts a left side petcock and has a fuel capacity of 4.2 gallons. Tank features a screw type bung.
Bobbed 1 piece gas tank is for carburetor models. Tank will accept stock tank components. Uses stock style FXDWG dash console. Requires sanding and primer before painting. Petcock should be masked or plugged during painting for easy installation of petcock. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit, clear, condition and seal to help stop leaks and prevent corrosion.
Fits:
FXDWG 1996-2003
Style: Bobbed
Measurements
Top Length: 16.5" Bottom Length: 18.5" Rear Width: 8.5"
Front Width: 14" Rear Height: 3.5" Front Height: 8"
Front Tunnel Height: 7" Rear Tunnel Height: 2" Tunnel Length: 17"
|
|
| Gas Tanks-"BOBBED GAS TANK, ONE PIECE FXDWG" |
| $629.99 |
|
|
|
"BOBBED GAS TANK, ONE PIECE FXDWG
OEM No: 61599-06
Bobbed 1 piece gas tank for EFI models is replacement type. Comes as left side fuel gauge and right side screw cap.
Tank requires sanding and primer before painting. Petcock should be masked or plugged during painting for easy installation of petcock. It is suggested to pressure test the tank and use a tank sealer. We suggest using Kreem gas tank combo kit, clear, condition and seal to help stop leaks and prevent corrosion.
Fits:
FXDWG 2006-2009
Style: Bobbed
Measurements
Rear Width: 10.4" Front Width: 16"
|
|
| Gas Tanks-"STRETCH GAS TANK, LSP" |
| $369.99 |
|
|
|
"2” Stretch One Piece Tank fits 1991-2005 FXD-FXDWG carb
models.
Gas tank accepts left side petcock and has a fuel capacity of 4.2 gallons. Tank includes aircraft type cap installed.
Tank is for carburetor type models. Requires sanding and primer before painting. Petcock should be masked or plugged during painting for easy installation of petcock. The back of the tank is stretched 2" and does not affect the mounts. This gives the gas tank a cleaner more custom look. It is suggested to pressure test the tank and use a tank sealer. We suggest using Kreem gas tank combo kit, clear, condition and seal to help stop leaks and prevent corrosion.
Fits:
FXD 1991-2005
FXDWG 1991-2005
Style: Stretch
Measurements
Top Length: 17.5" Bottom Length: 20" Rear Width: 8.5"
Front Width: 14.5" Rear Height: 2.5" Front Height: 8"
Front Tunnel Height: 7" Rear Tunnel Height: 1.5" Tunnel Length: 15.5"
|
|
| Gas Tanks-STRETCH GAS TANK 4.2 ONE PIECE-BUNG |
| $369.99 |
|
|
|
2” Stretch One Piece Tank.
Gas tank accepts left side petcock and has a fuel capacity of 4.2 gallons. Tank features a 2" stretch to the back of the tank and does not affect the mounts.
Accepts vented bung caps. Tank is not for fuel injected models. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit, clear, condition and seal to help stop leaks and prevent corrosion. Check petcock opening, making sure the petcockcan be easily installed. petcock should be masked or plugged during painting for easy installation of petcock.
Fits:
FXD 1991-2005
FXDWG 1991-2005
Style: Stretch
Measurements
Top Length: 17.5" Bottom Length: 20" Rear Width: 8.5"
Front Width: 14.5" Rear Height: 2.5" Front Height: 8"
Front Tunnel Height: 7" Rear Tunnel Height: 1.5" Tunnel Length: 19.5"
|
|
| Gas-Tank-BADLANDS FLATSIDE TANK MOUNT KIT-LBCTR49-9222 |
| $67.99 |
|
|
|
BADLANDS FLATSIDE TANK
MOUNT KIT
• All parts necessary to mount flatside fuel
tanks on any custom frames
• Kit comes with mounting hardware
• Tank grommets, dash spacers and
instructions
• Made in USA
• Fits 84-99 Big Twin models |
|
| Gas-Tank-BADLANDS LATE STYLE FAT BOB MOUNTING KIT-LBCTR49-9215 |
| $75.95 |
|
|
|
FAT BOB MOUNTING KIT
• Enables installation of late model Fat
Bob gas tanks on 58-84 FX and FLH
frames
• Kit includes detailed instructions,
mounting brackets, hardware and
grommets
• Easy to install with a minimum of welding
• Fits 58-84 FL, FX models |
|
| Gas-Tank-BIKER’S CHOICE SOFTAIL STRETCHED GAS TANK LBCTR-48-9750-9751 |
| $349.95 |
|
|
|
BIKER’S CHOICE
® 48-9750
SOFTAIL STRETCHED GAS TANK
•
Fits standard flatside mounts
•
Stretched 1-1/2”
•
1-piece
•
Smooth, with no dash
•
Includes hardware and rubber grommets
•
Must use vented gas caps
•
Uses screw-in style gas caps, not included
•
Fits 85-99 Softail models and custom frames
4.2 Gallon For Screw Cap 48-9750 $349.95
4.2 Gallon For Flush Cap 48-9751 349.95 |
|
| Gas-Tank-BIKER’S CHOICE® 2” SMOOTH STRETCH GAS TANK-LBCTR-48-9803 |
| $489.99 |
|
|
|
BIKER’S CHOICE® FXR 2” SMOOTH STRETCH GAS TANK
•
Made of 1-piece heavy duty steel construction
•
Comes with single chrome-plated aluminum aero locking gas cap in the center
•
4.2 gallon capacity
•
Fits 84-94, 99 FXR modelse |
|
| Gas-Tank-BIKER’S CHOICE® 2” STRETCH-LBCTR-48-9821-9822-2785 |
| $429.95 |
|
|
|
BIKER’S CHOICE® 2” STRETCH GAS TANK
•
2” stretch, 1-piece tank
•
Dash mount for 2000 and up with left bung to accept
O.E.M. gas cap with gauge
•
Carbureted and fuel injection
•
Comes with welded on extensions
•
Caps not included, tanks use screw-in style cap
•
5.1 gallon capacity
Applications 00-03 Softail Carbureted (exc. FXSTD) 48-9821 $429.95
01-07 Softail Fuel Injected; 04-06 Carbureted (exc. FXSTD) 48-9822 439.95
2008 Softail FI 48-2785 485.95 |
|
| Gas-Tank-BIKER’S CHOICE® 2” STRETCHED GAS TANK-LBCTR-48-2637 |
| $369.95 |
|
|
|
BIKER’S CHOICE® 2” STRETCHED GAS TANK
•
1-piece, flat top 2” stretched
•
Center mounted bung to take 1 O.E.M. style screw-in gas cap
•
No provision to install dash
•
Mounting hardware included
•
Uses screw-in style gas caps, not included
•
Fits 00-03 Softail carbureted models |
|
| Gas-Tank-BIKER’S CHOICE® CUSTOM 2” STRETCHED TANK-LBCTR49-3233 |
| $399.95 |
|
|
|
BIKER’S CHOICE®
CUSTOM 2” STRETCHED TANK
• 4 gallon capacity
• Center screw-in type bung
• 2” stretch from stock
• Mounting hardware included
• Fits 04-06 Sportster model |
|
| Gas-Tank-BIKER’S CHOICE® CUSTOM BOLT KIT FOR FLATSIDE TANK-LBCTR48-9843 |
| $23.99 |
|
|
|
BIKER’S CHOICE®
CUSTOM BOLT KIT
FOR FLATSIDE TANK
• Chrome-plated hardware replaces front
O.E.M. gas tank mount bolts
• Includes 4 - 5/16 - 18 x 1” flathead
allen screws with recessed washers
• Fits 91-99 Softail models |
|
| Gas-Tank-BIKER’S CHOICE® CUSTOM STRETCHED GAS TANKS-LBCTR-48-9872-9873 |
| $379.95 |
|
|
|
BIKER’S CHOICE®
CUSTOM STRETCHED GAS TANKS
•4.0” stretched - 4.1 gallon capacity
•4.5” stretched - 4.7 gallon capacity
•Tunnel measures 22” front to back
•Screw in bung
•Mounting bracket is rubber insulated to prevent vibration cracks
•Weld to frame brackets recessed in the bottom of the tank
•Tapped 1/8” - 27 NPT at rear of tank for crossover line (not included)
•Uses 13/16” (22mm) fuel valve
•Works with screw-in type pop-up gas cap #48-9820
Frame Requirements:
•4” stretch in the front down tubes
•3” minimum stretch in the backbone
•Backbone O.D. cannot exceed 1-3/4” }
Application
4.5” Stretch 48-9872 or 4.0” Stretch 48-9873 |
|
| Gas-Tank-BIKER’S CHOICE® FAT BOB GAS TANK MOUNTS-LBCTR49-2942 |
| $9.95 |
|
|
|
BIKER’S CHOICE®
FAT BOB
GAS TANK MOUNTS
• Lower front
• High quality O.E.M. type replacements
• Mounts must be welded to the frame
• For custom frames
• Fits 36-84 4-Speed Big Twin models |
|
| Gas-Tank-BIKER’S CHOICE® FAT BOB GAS TANKS-LBCTR-49-2660-2661 |
| $179.95 |
|
|
|
BIKER’S CHOICE® FAT BOB GAS TANKS
• Heavy-duty steel construction
• Replicas of O.E.M. tanks
• 22mm threads
• Vented cap must be used on right side
• Fits 36-84 4-Speed Big Twin
3.5 Gallon 49-2660
5 Gallon 49-2661 |
|
| Gas-Tank-BIKER’S CHOICE® FLATSIDE GAS TANKS-LBCTR-49-0281-0285 |
| $209.95 |
|
|
|
BIKER’S CHOICE® FLATSIDE GAS TANKS
•Heavy-duty steel construction
•Replicas of O.E.M. tanksction
•22mm threads
•Vented cap must be used on right side
•Uses screw-in style gas caps, not included
•Fits 84-99 Softail models Note: Biker’s Choice® #49-0281 may be used on 93-99 Softail Models if vented cap is used on right side tank.
5 Gallon Screw Top H-D#61211-84B 49-0281
6 Gallon Screw Top 49-02851 Will also fit custom frame |
|
| Gas-Tank-BIKER’S CHOICE® FLATSIDE STRETCHED-LBCTR-48-9752 |
| $369.95 |
|
|
|
BIKER’S CHOICE®
FLATSIDE STRETCHED GAS TANK
•
No hardware included
•
5.5 gallon capacity
•
Screw cap, not included
•
Fits 84-99 Softail and custom frames with flatside mounts |
|
| Gas-Tank-BIKER’S CHOICE® FLATSIDE TANK MOUNTING KIT-LBCTR48-9715 |
| $59.95 |
|
|
|
BIKER’S CHOICE®
FLATSIDE TANK
MOUNTING KIT
• Complete kit includes custom mounting
hardware and washers
• Forward mounts are threaded for a
clean installation
• Perfect for replacement of earlier mounts
or for new bike construction
• Fits 84-99 Softail models and custom
frame with flatside mounts |
|
| Gas-Tank-BIKER’S CHOICE® FLATSIDE-TO-FAT BOB TANK MOUNTING KIT-LBCTR48-9727 |
| $59.95 |
|
|
|
BIKER’S CHOICE®
FLATSIDE-TO-FAT BOB
TANK MOUNTING KIT
• Flatside tank to Fat Bob frame
• Fits flatside tanks on 4-speed Fat Bob
style mounts
• Includes all required hardware and
grommets
• Requires a small amount of welding at
the rear mounts
• Fits 58-84 FL; FX models |
|
| Gas-Tank-BIKER’S CHOICE® FLT 2” STRETCHED GAS TANKS-LBCTR-48-9892-9893 |
| $449.95 |
|
|
|
BIKER’S CHOICE® FLT 2” STRETCHED GAS TANKS
•4.7 gallon capacity
•Screw-in bung
•1-piece stretch design with dash
Applications
89-96 FLT Models 48-9892 $449.95
97-07 FLT Models 48-9893 449.95 |
|
| Gas-Tank-BIKER’S CHOICE® GAS TANK-LBCTR49-1300 |
| $150.99 |
|
|
|
BIKER’S CHOICE®
GAS TANK
• 3.1 gallon capacity
• Heavy-duty steel construction
• Tanks accept 3/8”-18 NPT petcock and
use #49-0437 early vented gas cap
• Fits 82-94 Sportster models
Note: Biker’s Choice® #49-1300 may be used on
92-94 Sportsters if gas cap is changed to a vented cap. |
|
| Gas-Tank-BIKER’S CHOICE® INDENT BOBBER GAS TANK-LBCTR-48-9662 |
| $329.95 |
|
|
|
BIKER’S CHOICE® INDENT BOBBER GAS TANK
•2.4 gallon capacity
•Comes with universal mount
•Spinner gas cap
•Indent |
|
| Gas-Tank-BIKER’S CHOICE® O.E.M. STYLE MOUNTING HARDWARE-LBCTR49-0284 |
| $11.99 |
|
|
|
BIKER’S CHOICE®
O.E.M. STYLE
MOUNTING HARDWARE
• Complete hardware kit services front and
rear mounts on Fat Bob style gas tanks
• Includes extra spacers for adjusting
clearance between right tank and
Shovelhead rear rocker box
• Fits 36-84 4-Speed Big Twin models
H-D#61605-36 |
|
| Gas-Tank-BIKER’S CHOICE® QUICKBOB TANKS FOR 82-03 SPORTSTERS-LBCTR42-0626-9755 |
| $329.99 |
|
|
|
BIKER’S CHOICE®
QUICKBOB TANKS
FOR 82-03 SPORTSTERS
• Accepts screw type caps, not included
• Includes rubber grommets and mounts
• Capacity Note: May be used on 92-94 Sportsters if gas cap is
changed to a vented cap.
• 95-03 models require #48-9733 relocation kit listed below
Note: #42-0626 will not fit 1200S Sportster models. Check fitment
prior to painting |
|
| Gas-Tank-BIKER’S CHOICE® SPORTSTER ROLLED EDGE GAS TANKS-LBCTR48-9833 |
| $164.95 |
|
|
|
BIKER’S CHOICE®
SPORTSTER ROLLED EDGE
GAS TANKS
• Comes complete with mounting hardware,
rubber grommets and tank screw-in gas cap
• Center fill screw-in style gas cap
• 3.4 gallon capacity
• Fits 95-03 Sportster models
Product Length: 22.6 inches
Product Width: 13.0 inches
Product Height: 10.0 inches
Product Weight: 11.3 pounds |
|
| Gas-Tank-BIKER’S CHOICE® TANK EXTENSIONS-LBCTR41-0004 |
| $100.99 |
|
|
|
BIKER’S CHOICE®
TANK EXTENSIONS
• 6-piece extension
• Fits flatside 5 gallon gas tanks |
|
| Gas-Tank-FAT BOB 3” STRETCHED-LBCTR-48-9787 |
| $389.95 |
|
|
|
BIKER’S CHOICE®
FAT BOB 3” STRETCHED GAS TANK
•
3” stretch with screw-in bung
•
5 gallon capacity
•
Heavy-duty steel construction
•
1-piece, made without welded seams on extension
•
Fits 84-99 Softail and custom frame with flat side mounts |
|
| Gas-Tank-GARDNER-WESTCOTT FUEL TANK CUSTOM MOUNTING HARDWARE KITS-LBCTR04-1119-1133 |
| $20.99 |
|
|
|
BIKER’S CHOICE®
O.E.M. STYLE
MOUNTING HARDWARE
• Complete hardware kit services front and
rear mounts on Fat Bob style gas tanks
• Includes extra spacers for adjusting
clearance between right tank and
Shovelhead rear rocker box
• Fits 36-84 4-Speed Big Twin models
H-D#61605-36 |
|
| Gas-Tank-PAUGHCO 04-06 SPORTSTER STOCK REPLACEMENT TANK-LBCTR59-9208 |
| $411.95 |
|
|
|
PAUGHCO
04-06 SPORTSTER STOCK
REPLACEMENT TANK
• 4.5 gallon capacity
• Made specifically for the newest
generation of Sportsters with rubber mounted engines
• Features an offset, stock-style screw-in filler with vent, and has a
standard 22mm external thread petcock fitting for O.E.M. and
aftermarket petcocks installed on the left side of the tanks
• Includes a threaded hose line fitting for the vent bung on the
bottom right side of the tank
• Attaches to the stock frame mounting points on all 04-06
Sportsters with carburetors
• Cap not included
• Dimensions: 21” tank length, 14” tank width, 9” tank depth,
21” tunnel length, 5” tunnel depth, 3-1/4” tunnel width,
23” centerline hole-to-hole on mounting brackets
• Special Order Only |
|
| Gas-Tank-PAUGHCO CUSTOM MOUNT MUSTANG TANKS-LBCTR59-9222 |
| $202.99 |
|
|
|
PAUGHCO
CUSTOM MOUNT
MUSTANG TANKS
� 4.75 gallon capacity
� Dual cap
� 20� long, 13� wide, 8� deep with left late model petcock outlet
and indented bottom for rocker box clearance; tunnel is 19-1/2�
long, 2-3/16� wide, 4-1/4� deep
� Fits Sportster & Big Twin models
Note: Tanks require custom mounting� |
|
| Gas-Tank-PAUGHCO EXTRA NARROW TUNNEL CUSTOM GAS TANK-LBCTR59-9203-9209 |
| $171.95 |
|
|
|
PAUGHCO
EXTRA NARROW TUNNEL
CUSTOM GAS TANK
� Single cap, wide Mustang style tank
� 2.4 gallon capacity
� Comes with two 1/4� petcock outlets
� Horseshoe mounting tab in front
� Dimensions: 16-1/2� tank length,
9� tank width, 7� tank depth,
2-1/4� tunnel depth,
2-1/4� tunnel width,
17� centerline hole-to-hole on
mounting brackets |
|
| Gas-Tank-PAUGHCO MUSTANG TANKS-LBCTR59-9292 |
| $202.99 |
|
|
|
PAUGHCO
MUSTANG TANKS
� 3 gallon capacity and one
3/8� petcock outlet
� Dual cap
� Designed to fit stock frame mounts
� Built-in cap well-drain to prevent fuel contamination
� Fits 82-94 Sportster
Note: Before painting, we strongly recommend tanks be pressure
tested and sealed. #59-9292 may be used on
92-94 Sportsters if gas cap is changed to a vented cap. |
|
| Gas-Tank-PAUGHCO MUSTANG-STYLE LOW AND HIGH TUNNEL TANKS-LBCTR59-9201-9202 |
| $293.95 |
|
|
|
PAUGHCO
MUSTANG-STYLE LOW
AND HIGH TUNNEL TANKS
� 4 gallon capacity
� Traditional Mustang look, but designed to fit on modern customs
with longer stretches in the top tubes
� Constructed with the stock-style screw-in filler and vent, and has
a standard 22mm external thread petcock fitting for O.E.M.
and aftermarket petcocks installed on the left side of the tanks
� Includes a threaded hose line fitting for the vent bung on the
bottom of the tank
� Cap not included
� Low tunnel dimensions: 22-1/2� tank length,
11� tank width, 10� tank depth, 22-1/2� tunnel length,
3-1/2� tunnel depth, 3� tunnel width, 19� centerline hole-tohole
on mounting brackets
� High tunnel dimensions: 22-1/2� tank length, 12� tank width,
10� tank depth, 22-1/2� tunnel length, 5-1/2� tunnel depth, 3�
tunnel width, 20� centerline hole-to-hole on mounting brackets- |
|
| Gas-Tank-PAUGHCO UNIVERSAL HIGH TUNNEL TANK3-LBCTR59-9206-9207 |
| $299.95 |
|
|
|
PAUGHCO
UNIVERSAL HIGH TUNNEL TANK
• Designed to fit on modern customs with longer stretches in the
top tubes
• Features a nicely contoured teardrop shape
• Constructed with the stock-style screw-in filler and vent, and has
a standard 22mm external thread petcock fitting for O.E.M.
and aftermarket petcocks installed on the left side of the tank
• Includes a threaded hose line fitting for the vent bung on the
bottom of the tank
• Cap not included
3.5 Gallon
• Dimensions: 21” tank length, 11” tank width, 9” tank depth,
21” tunnel length, 5” tunnel depth, 3” tunnel width,
21-1/2” centerline hole-to-hole on mounting brackets
3.5 Gallon Universal High Tunnel Tank 59-9206 $299.95
4.6 Gallon
• Dimensions: 21” tank length, 14” tank width, 9” tank depth,
21” tunnel length, 5” tunnel depth, 3” tunnel width,
22” centerline hole-to-hole on mounting brackets
4.6 Gallon Universal High Tunnel Tank 59-92071 $315.95
1 Special Order Only |
|
| Gas-Tank-PAUGHCO UNIVERSAL LOW TUNNEL TANK-LBCTR59-9204-9205 |
| $315.95 |
|
|
|
PAUGHCO UNIVERSAL
LOW TUNNEL TANK
• Designed to fit on modern
customs with longer stretches
in the top tubes
• Features a nicely contoured
teardrop shape
• Constructed with the stock-style
screw-in filler and vent, and has
a standard 22mm external
thread petcock fitting for O.E.M.
and aftermarket petcocks installed on the left side of the tank
• Includes a threaded hose line fitting for the vent bung on the
bottom of the tank
• Cap not included
• Special Order Only
Description P/N Retail
3.4 Gallon
• Dimensions: 21” tank length, 11” tank width, 9” tank depth,
21” tunnel length, 3-1/2” tunnel depth, 3” tunnel width,
21-1/2” centerline hole-to-hole on mounting brackets
3.4 Gallon Universal Low Tunnel Tank 59-9204 $315.95
4.8 Gallon
• Dimensions: 21” tank length, 14” tank width, 9” tank depth,
21” tunnel length, 3-1/2” tunnel depth, 3” tunnel width,
22” centerline hole-to-hole on mounting brackets
4.8 Gallon Universal Low Tunnel Tank 59-9205 |
|
| Gas-Tank-TANK MOUNTING GROMMETS-LBCTR04-5030-41-1460-1461 |
| $13.95 |
|
|
|
TANK MOUNTING
GROMMETS
• O.E.M. replacements
• Fits 1985 FXSB, FXEF; 85-86 FXWG;
84-99 Softail |
|
|
|
| Gas Tanks- Wyatt Gatling 6" Stretch Image Gas Tank 4.1 Gallon-LBCVT-38-0292 |
| $420.99 |
|
|
|
Wyatt Gatling 6" stretch Image gas tank features indented side panels and a pop up bung. Accepts a left side petcock and has a fuel capacity of 4.1 gallons.
The back of the tank is stretched 6" and does not affect the mounts. This gives the gas tank a cleaner more custom look. Order pop-up gas cap separately. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit, clear, condition and seal to help stop leaks and prevent corrosion. Check petcock opening, making sure the petcock can be easily installed. Petcock should be masked or plugged during painting for easy installation of petcock.
Fits: Custom application
Measurements
Top Length: 27" Bottom Length: 21-1/2" Rear Width: 3"
Front Width: 12" Rear Height: 2" Front Height: 9"
Front Tunnel Height: 3-1/2" Rear Tunnel Height: 1-1/2" Tunnel Length: 24"
|
|
